Switching Layout - Part 3 - Storage Mechanism

In Part 1 I said that one of my criteria for this switching layout is that, when stored, it must not occupy a lot of floor space. I have come up with a plan that will occupy an area along one of the 11 foot walls in the den and, when stored, will protrude into the room a distance of no further than 15 inches.

In the following drawing, the various colours depict:

  • yellow - hinged countertop
  • blue - front edge of cabinetry (affixed to the front will be standard kitchen cabinet doors)
  • pink - the layout top (to be made of solid pink foam insulation board, 1 1/2 inches thick
  • light brown - the wood supporting structure underneath the pink foam insulation board
  • dark brown disks - 2 inch nylon garage door rollers that will be mounted in 2 inch x 3 inch (nominal) dimensional lumber
  • blue disk (barely visible in the top-right vicinity of the structure) - wheels that will be mounted in several locations along the top front of the front edge of the cabinetry; the layout will rest on these wheels when deployed to prevent sagging of the 11 foot long layout top.
  • orange-brown - 2 inch x 2 inch (nominal) dimensional lumber to be mounted on 3/4 inch plywood fastened to the walls on each end of the room. This will serve as guides within which the nylon garage door rollers will travel when raising and lowering the layout.
  • scale model buildings are depicted in various colours.


The following drawing shows the layout in its operational position:


This is a short video showing how the layout will be raised and lowered:



 

Switching Layout - Part 2 - Track Plan

 I have devised the following track plan for my switching layout:

Length = 10 ft. 11 3/4 in.

Width = 28 in.

HO Scale.

Turnouts (hand made):

  • 11 x left-hand #5 Fast Tracks turnouts
  • 4 x right-hand #5 Fast Tracks turnouts
  • 1 x curved 36-24 #6 Fast Tracks turnouts
Crossings (hand made):
  • Fast Tracks 30-degree crossing
Turnout control:
  • 16 x Bullfrog (by Fast Tracks) manual turnouts
Buildings to be all scratch-built.

This is a larger image, turned on its side:





Switching Layout - Part 1 - Concept

On November 11, 2021 I wrote about my prostate issue and the need to have 33 radiation treatments. Those treatments ended on December 20, 2021 so Christmas 2021 was extra special for me. Roughly 2/3 of the way through my treatments I became quite fatigued and had very little motivation to do much in the way of model railroading, or anything else for that matter.

In the second week of January my wife and I drove to West Kelowna, British Columbia, to spend a couple of months in the two-bedroom condominium that we purchased in autumn 2021. As I have been preoccupied with obtaining and assembling furniture and going on a lot of long walks to enjoy the scenery and the (relatively) mild winter weather I decided to take a break from the blog.

The fatigue from my radiation treatments resolved itself by the end of January and I feel great. We return home to Saskatchewan in mid-March at which time I must have a PSA test and then a consultation with the radiation oncologist. This will be the "moment of truth" as to whether the radiation treatments were successful.

Our condo in West Kelowna has two bedrooms plus a den. The den is just over 3.4 by 2.1 metres (11 by 7 feet) in size and has no window.

After being away from my model railroading hobby for some time I put my mind to how I could build a model railroad in the den, while at the same time not permanently occupying much of the room and rendering it useless for any other purpose. I concluded that a shelf-style switching layout would be fun to try. I have never before built a switching layout.

Following are my criteria for this switching layout:

  • HO scale.
  • must be able to be stored in a space-saving way when not in use, taking up minimal floor space.
  • manually operated turnouts, hand-made using #5 Fast Tracks jigs.
  • Digital Command Control (DCC) electronics.
  • All buildings will be scratch-built.
  • Layout dimensions will be approximately 3.4 by 0.7 metres (11 feet by 28 inches).
In upcoming postings I shall share a proposed track plan and my plans for being able to store the layout in such a way that minimal floor space is occupied.


Here are three photos from the balcony of our West Kelowna condo:

The above photo, taken in October 2021, is facing north-west showing Shannon Lake and, on the right, the Shannon Lake Golf Course.



The above photo, taken in January 2022, is of the same view.


Night, taken in January 2022.