Wascana Canyon Railway v2 - Part 5 (of 5)


As for the backdrop, one of the fellows in our train club, Bill S., had done an excellent clinic on backdrop painting. His technique is based on that of Chris Lyon whose videos can easily be found on YouTube.

Following the clinic, I constructed a flimsy mock-up of my backdrop out of Masonite, Bristol Board and 1x2 lumber. I didn’t want to be experimenting on the actual backdrop that I had spent so much time creating. Here is a picture of my mock-up, placed against my actual backdrop so it received the same lighting colour as found on the model railroad. I was quite happy with the overall result and felt confident that I could apply the same techniques when the time came to be doing the scenery for the railroad.



Since I had not finalized my plans for scenery, other than it would be based on the mountains of the Columbia Valley in British Columbia, Canada, I decided to only add clouds to my backdrop. I would leave hills, mountains and trees until later. Here are pictures of the result.






Next I set about track laying. As you can see from the pictures, I installed extruded foam insulation board on all surfaces. This is the same material that several members of our Free-mo modular group and I have used on our Free-mo modules with great success. The foam is easy to carve, glue and paint. I have not experienced any of the shrinking of the foam that some others have written about.

I laid a continuous loop of track with turnouts installed at appropriate locations.

This story ends here!

At about time I was laying track, our model railroad club was forced to leave its premises in the basement of a public school. It was very sad to take down a beautiful model railroad which was 95% complete thanks to the effort and skill of various club members over a 20-year period.

Following a period of introspection, we decided that our club’s main model railroad would be Free-mo. I have several blog posts which explain what Free-mo is about. I devoted a great deal of time to learning what I could about Free-mo and began constructing my first modules. The basement layout sat for almost two years with no further work being done. At last I had to admit to myself that I was no longer motivated to work on it.

In my next series of posts, I shall outline how I redeveloped the Wascana Canyon Railway without having to destroy much of what I had built.

Wascana Canyon Railway v2 - Part 4

In Part 3 I described the way in which I constructed the benchwork.

The next step was to finalize the backdrop. Unfortunately, I neglected to take any photographs of how I made the cove between the vertical Masonite panels and the false ceiling under the lighting apparatus. However, to describe the process is not difficult.

I purchased 20 or 25 sheets of white Bristol Board from a dollar store. I painted each sheet with three very light coats of white paint primer, taking care to ensure that each coast was VERY light – if the Bristol Board becomes saturated it will warp and won’t return to its original shape when dry.

Using a pencil and straight edge I drew a line towards the top of the vertical Masonite and another pencil line along the false ceiling. These lines marked where I wanted the Bristol Board to align.

I then applied spray adhesive to two strips about 8 inches wide along each of the long sides of a sheet Bristol Board and carefully positioned it in place, lining up with the pencil lines. I overlapped the next sheet of Bristol Board about 2.5 cm (1 in) over its neighbour and continued on around the room.

I then applied two more very light coats of white paint primer to make sure the Bristol Board was extremely well sealed. Using drywall mud very sparingly using a smooth plastic putty knife I applied the lightest possible coat along the seams of the Bristol Board. When completely dry I repeated with one or two very light coast of drywall mud until I was satisfied it was smooth enough. I then gently sanding with fine foam sanding blocks until I was satisfied. I finished this off with two more very light coast of white paint primer.

The goal in each of the above steps is to not get the Bristol Board so wet that it warps, either from paint primer or drywall mud. I am pleased to report that after four years of summer and winter weather there are no cracks in this surface.

I then painted the entire backdrop with a light blue colour followed by a darker blue on the horizontal part beneath the false ceiling. I blended the two blues using an airbrush so there was not a distinct line visible. My rationale for using a darker shade of blue is to mimic nature – when you are outside on a perfectly sunny day the blue sky close to the horizon looks is a lighter shade of blue than when you look above your head. I was very pleased with the result.

For lighting I used double fluorescent strip lighting, daylight in colour tone.

wall showing partial paint application, showing two shades of the same blue


note the curved corner and coved top


Completed walls ready for backdrop. I painted the valence the same blue as the lower part of the walls.

To be continued……

Wascana Canyon Railway v2 - Part 3


In Part 2 I described the way in which I mounted the Masonite and prepared the surface for a future backdrop.

The next step was to construct some bench-work. The bench-work that was to sit on top of the shelf brackets was based on simple L-girder construction with a 1/8 in. Masonite fascia mounted to the front of some basic framing.

All bench-work would eventually be topped with extruded foam insulation panels.




I wanted the peninsula support to be very strong, but light and I wanted it to be self-supporting and not in any way relying for its strength on the shelf supports.

Having seen many and built several railway trestles in my time was aware of the strength of this design but without having to use a lot of material. However, a traditional trestle would not lend itself well to supporting my peninsula because the base would be wider than the top, creating a tripping hazard.

I reasoned that an upside-down trestle would be just as strong so I built my trestle structure upside down. With the base being narrower than the top, there was no tripping hazard. I used 2x2 and 1x2 lumber to construct the trestle.





To be continued……

Wascana Canyon Railway v2 – Part 2


In Part 1 I described how I was going to fasten the 1/8 Masonite to the walls. This worked very well because there were enough fastening points that the Masonite stayed flat.

Before mounting the Masonite in the two corners, I bent it into a gentle curve on the workshop floor, wrapped it with string so it would roughly maintain the desired curve and sprayed the outside of the curve with water approximately every 90 minutes for a day, leaving it over night to make sure it was completely dry.

I didn’t saturate the Masonite but made it wet enough that it was damp to the touch (if you saturate Masonite it can “puff up” but it won’t return to its previous state once dry). The Masonite took on a gentle curve, making it a lot easier to screw into the 1x2 framework I had fastened to the wall.




After all the Masonite was mounted to the wall, I gave it a coat of paint primer to seal it. Then, using drywall tape and drywall mud I covered all the joins and screws. As I had used drywall screws to mount the Masonite, the screw heads were flush with surface without any need for countersinking. 





After two or three rounds of sanding and patching I had a very smooth and stable surface which I again painted with primer to seal it – I applied two coats of primer.





To be continued……


Wascana Canyon Railway v2 – Part 1


On November 11, 2019 I posted a blog entry which described the model railroad that I constructed in the basement of the last home we lived in. It is found among my other Model Railroading posts. In that post I described lessons learned from constructing and operating WCR v1 and I was determined to learn from those lessons.

The house we have lived in since our move in 2015 had a professionally finished basement which included a room that the previous owner had used for a home theatre. This room is ideal for a small-to-medium size HO scale model railroad. It measures approximately 5.5 metres (18 ft.) by 4 metres (13 ft.) with a 2.4 metre (8 ft.) high ceiling.

This house has four bedrooms, two of which are in the basement. My wife and I agreed when we purchased the house that we only needed one guest bedroom in the basement, so I converted the largest of the two basement bedrooms into a workshop. I had the carpet removed in that room and replaced with a hard floor, so it is much easier to clean and to mop up spills of glue, paint, etc. By having a separate workshop, I avoid creating dust in the model railroad room from cutting, filing or sanding wood.

My plan was to create a model railroad which would be affixed to two walls with a long peninsula extending into the middle of the room. I would use steel Rubbermaid Twin Track Shelf Brackets which slot into Twin Track uprights mounted to the walls. Each of these brackets is 61 cm (24 in.) long and rated to hold 125 kg (275 lbs.). This avoided having any supports extending to the floor, except under the peninsula.

Note the slotted uprights, the white shelf supports and the wood framing. The first piece of Masonite can be seen screwed to the wood framing.

I wanted very even and indirect lighting that would not shine in a viewer’s eyes. Finally, I wanted to have a backdrop with gentle curves around the corners of the room as well as a cove between the backdrop and a false ceiling that would be part of the lighting apparatus.

The era of my model railroad would be 1950, the season would be fall and the geographic area would be the Columbia Valley of British Columbia.

The project started with determining the height of the track. It would be 48 inches above the floor, with negligible grade. I mounted the vertical steel supports on the wall, ensuring that these were all screwed into the wooden studs. I then screwed a simple framework of 1x2 lumber onto which would be fastened the 1/8-in. Masonite backdrop.

To support the lighting, I again used the steel shelf brackets, this time 30 cm long (12 in.) which also mount in the Twin Track uprights which extend high enough up the wall. Using a very simple lightweight design of ¼ in. plywood braced with 1x2 lumber I made what is effectively a shelf which sits on top of the upper shelf brackets. Underneath the shelf brackets is a 1/8 in. Masonite false ceiling intended for the upper reaches of the curved and coved backdrop.

the brackets holding the lighting shelf

The simple wood brackets are used to mount the false ceiling to which will be attached the backdrop. By making these on an angle parallel to the brackets themselves, the top portion of the backdrop will slope away from the viewer and does not meet the wall at an abrupt 90-degree angle.

There is room in front of the brackets and false ceiling to mount fluorescent strip lighting. As the lighting is mounted at the front it is hidden by the valence which is 46 cm (18 in) deep. This creates even, bright, indirect light.

the false ceiling and the florescent strip lighting

The valence is made of 1/8 Masonite in 91 cm (3 ft.) panels, each of which is independent of its neighbours and can be lifted to either access the lighting or when working on the backdrop.

the valence is on the left


To be continued . . .